October 28, 2026 - No. 43 In This Issue : Aviation Safety in a Rechargeable Society: Avoiding a Potential Crisis in the Cabin : Pentastar Aviation FBO Introduces Wingwalking Robots : New solid-state battery lines open for electric aircraft with 50% more energy : First KC-10 Leaves the Boneyard For New Life With Omega Air Refueling : Why Lockheed’s giant nuclear-powered attack carrier was too extreme to build (Video) : One-way attack drones intercepted using US ally’s uncrewed air system integrated with rockets : FAA New AD Orders Boeing 787 Slat Actuator Replacement : Boeing Supplier Dispute Halts 777 Freighter Output For Two Months : Pratt & Whitney expands Polish plant to boost production of F-35 engine components : Improper Elevator Cable Installation Causes Carbon Cub Crash Aviation Safety in a Rechargeable Society: Avoiding a Potential Crisis in the Cabin By: David S. Wroth, Vice President of Technology and Operations News | August 13, 2026 Note: See graphic in the original article. Aviation Safety in a Rechargeable Society: Avoiding a Potential Crisis in the Cabin Every week, passengers carry thousands of rechargeable devices through U.S. airspace without incident. But a small number of these devices enter a dangerous, uncontrollable overheating state known as thermal runaway. When an incident like this occurs, the lithium-ion batteries inside these devices can become very hot and swell to the point of smoking, sparking, and even catching fire or exploding. On average, a lithium-ion battery enters thermal runaway more than twice per week on passenger planes in U.S. airspace. That’s about 123 thermal runaway incidents per year, with 1 in 8 resulting in significant passenger disruption: diverted landings, emergency evacuations, and unplanned returns to the gate. 15% In 2025, there was an additional increase of 15% in thermal runaway incidents on passenger planes And unfortunately, these incidents have been consistently on the rise. In UL Standards & Engagement’s third annual Battery Safety in Aviation report, there was a 15% increase in thermal runaway incidents on passenger planes from 2024 to 2025. In response to the growing risk, airlines are tightening policies around rechargeable devices — including portable chargers, this year’s top culprit — to help reduce the risk of thermal runaway events in the cabin. Portable charger incidents jumped 42% over the prior year, and that growing risk earned the attention of airlines. Recently, American Airlines announced updated restrictions on portable chargers, limiting passengers to carrying two power banks under 100-watt-hours each with no in-flight recharging, and they must remain visible. Similarly, Southwest now limits passengers to one portable charger per flight, prohibiting overhead-bin storage and in-flight recharging. Every major U.S. carrier and many international airlines have changed policies recently and it is important to check before flying. While these policy updates are important steps forward, the issue extends far beyond portable chargers. Beyond Power Banks: The Wider Risk While these policy updates are important steps forward, the issue extends far beyond portable chargers. Anything with a lithium-ion battery — about everything rechargeable — carries a thermal runaway risk. Every year, we see a wider variety of product types involved in incidents. And while portable chargers and e-cigarettes top the list, everything from baby monitors to personal fans have been reported. As society becomes increasingly dependent on rechargeable technology, passengers are traveling with more battery-powered devices than ever before. The types of devices entering the aviation system continue to evolve, creating new operational and safety challenges for airlines and airport personnel alike. Considerations for All Airlines With so many devices essential to the travel experience, safer skies will be about managing the lithium-ion battery-powered products on board, not keeping them out. There is no silver bullet solution, but there are options to reduce the risk. 1. Educate passengers on where to pack rechargeable devices. ULSE surveys show 58% of travelers are unaware that lithium-ion batteries power many products they routinely use, leading to unsafe practices such as packing or storing devices improperly. Approximately 39% of passengers admit to putting lithium-ion powered products out of reach in their checked luggage. A device that’s within reach is a device that can be more quickly and effectively managed in the event of thermal runaway. 2. Strengthen cabin crew training. While most crews already receive thermal runaway response training, scenario-based instruction tied directly to available onboard equipment and real-world incident response is imperative. 3. Look for certified mitigation equipment. In the event of thermal runaway, a device can be placed into a containment product, which will help to contain any visible smoke, shrapnel, sparks, or flames emitting from the device. Containment products certified to UL 5800 have been proven the most effective for managing thermal runaway incidents in FAA blind testing. Airlines are making meaningful progress, but policy changes alone will not solve the growing challenge of lithium-ion battery incidents in aviation. Industry-wide collaboration among airlines, manufacturers, regulators, airports, and passengers will be essential to improving safety as rechargeable technologies continue to expand and evolve. To learn more about battery safety in the sky, check out our aviation safety information on ulse.org. To get involved with ULSE’s Thermal Runaway Incident Program, visit MyTRIPportal.org. Pentastar Aviation FBO Introduces Wingwalking Robots Note: See photo in the original article. The FBO says it is the first to adopt the autonomous safety technology Pentastar Aviation is the first FBO to introduce autonomous wingwalking robots to help guard against accidental damage to aircraft during towing operations. By Curt Epstein • Business Aviation Services Editor August 19, 2026 Pentastar Aviation, an FBO at Detroit-area Oakland County International Airport (KPTK), has rolled out a new safety innovation to its ground handling safety procedures: robotic units to assist with wing-walking monitoring during aircraft movement operations. The technology introduces automation to a critical part of aircraft ground handling. According to Michigan-based Pentastar, it has become the first aviation service company to integrate the robotics—developed by Cincinnati-headquartered Airtrek Robotics—into its day-to-day aviation operations. “Developing technology for aviation requires a deep understanding of the environment and the level of precision that safe aircraft operations demand,” said Chris Lee, co-founder and CEO of Airtrek Robotics. “Pentastar brought that real-world perspective to our development process, lending essential operational expertise that enabled us to refine how this technology works in practice. Together, we’ve created a new approach to a longstanding component of aircraft ground operations that, we believe, will become a model for others across the industry.” During aircraft towing operations, wingwalkers are typically positioned near the wings to communicate clearance and potential hazards to the tug operator. Most FBOs will use at least two line service technicians, one stationed on each wing. With the Airtrek system, autonomous robots move alongside the aircraft to monitor its surroundings and help identify possible obstacles, providing ground crews with greater visibility as they navigate busy ramp and hangar environments. According to Pentastar, it is implementing a new model for wingwalking that pairs the judgment and operational knowledge of its team with technology designed specifically for the aviation environment. “We are purposeful about our approach to innovation and how it can enhance the experiences we deliver every day,” said Ben Hammond, Pentastar’s v-p of FBO services, “Our high standard for safety requires precision and constant awareness, and Airtrek has created a solution that complements our crew and their expertise, taking that standard to the next level and further elevating our operations in a way that has previously not been done.” Pentastar has leased two of the autonomous wingwalking robots from the manufacturer on a monthly subscription basis. Operations began this month with full implementation expected by the fourth quarter. New solid-state battery lines open for electric aircraft with 50% more energy Dry electrode production cuts stage-specific emissions by up to 40%. By Atharva Gosavi Energy Oct 21, 2026 05:52 AM EST SAFT battery. SAFT French battery maker Saft has opened new battery production lines in Bordeaux to advance solid-state technology for electric aircraft and space applications. The TotalEnergies subsidiary inaugurated the lines on October 19, turning years of research into manufacturing capacity. The company said solid-state batteries can offer up to 50 percent higher energy density than conventional lithium-ion batteries, alongside improved safety. Those potential gains are particularly valuable in aviation, where battery weight and performance are central considerations for electrification. The facility gives Saft the capacity to develop and produce batteries using both sulfide and polymer electrolytes at room temperature. According to the company, it is the first French manufacturer with this combination of capabilities. Solid electrolytes offer safety and density gains Solid-state batteries replace the liquid electrolyte used in conventional lithium-ion cells with a solid material. The electrolyte allows ions to move between the battery’s electrodes during charging and discharging. Replacing the liquid component offers a route to safer, more compact batteries. Saft identifies increased energy density as another major advantage, citing potential improvements of up to 50 percent over classic lithium-ion technology. The Bordeaux production lines span polymer semi-solid and sulfide solid-state technologies. Their inauguration follows more than a decade of research, innovation, and industrial development, according to the company. “Solid-state batteries are among the most promising innovations for meeting tomorrow’s electrification needs,” said Cedric Duclos, Saft’s chief executive officer. “These new production lines mark an important milestone for Saft, as we turn several years of research into real industrial capacity, a statement of our ambition to establish France and Europe as leading players in this strategic technology,” he added. The dry electrode process The manufacturing approach also addresses emissions associated with making battery electrodes. Saft said its batteries use a dry electrode process that cuts carbon dioxide emissions from that production stage by up to 40 percent. That figure applies specifically to the electrode production stage, rather than the battery’s entire manufacturing process or lifetime emissions. The new lines represent a step toward industrializing the technology. Saft’s announcement focuses on building the capability to develop and produce these batteries, with aviation and space as target sectors. Both industries want improvements in safety, performance, and energy density. Saft says solid-state technology has attracted significant interest from the space industry and is also seen as important to aviation electrification. Aircraft battery cells enter evaluation Saft has already delivered semi-solid-state cells to Safran for the evaluation of future electric and hybrid aircraft architectures. The delivery builds on a partnership announced at the Paris Air Show in June 2025 to develop high-voltage battery systems for aviation. Most of the cells are destined for Safran’s System Test Center in Niort, France. The facility handles much of the validation and integration work needed to develop battery systems for electric and hybrid-electric propulsion. Evaluation of solid-state cells and batteries is expected to begin next year. For now, the delivered semi-solid-state cells provide an earlier milestone as the First KC-10 Leaves the Boneyard For New Life With Omega Air Refueling Published on: October 21, 2026 at 12:08 PM CESTFollow Us On Google News Kai Greet KC-10 N82247, formerly 86-0034, departing Davis-Monthan AFB. (Image credit: Dan Rivera/Aircraft Expeditions) The first of a number of retired U.S. Air Force KC-10A Extenders understood to have been acquired by contractor Omega Aerial Refueling Services left Davis-Monthan AFB on Oct. 20 for San Antonio International Airport. Now on the civil aircraft register as N82247, the trijet formerly carried the serial 86-0034 during its 35 year U.S. Air Force career. It was one of a small number of KC-10s withdrawn to the care of the 309th Aerospace Maintenance and Regeneration Group (AMARG) ‘boneyard’ at Davis-Monthan Air Force Base, Arizona in 2021. In 2025, 86-0034 was among the ten KC-10 airframes listed for auction via government auction. While officially unconfirmed, it was reported by Aviation Week that the San Antonio-based Omega Aerial Refueling Services had successfully made bids for all available airframes. Omega’s current fleet comprises three former Royal Netherlands Air Force KDC-10 tankers alongside two KC-707s which were converted for probe and drogue refueling after purchase. Only two of these five tankers are outfitted for the flying boom refueling system favored by the U.S. Air Force. Notably, the ten KC-10s sold at auction did not include the boom, and a boom was clearly not fitted to N82247 for its delivery flight. However, the future restoration of a boom refueling capability would certainly be possible if required for Omega’s contracts. In recent years the company has provided a greater level of services for the U.S. Air Force, previously focusing on U.S. Navy and U.S. Marine Corps contracts. In 2024, an Omega KDC-10 completed the first privately contracted refuelings of a B-52 Stratofortress and MC-130J Commando II, followed by the first C-17 Globemaster III a year later. While commercial aerial refueling providers cannot complete the same frontline duties as air force tankers, their provision can be used during training and transit sorties to alleviate the burden on active duty aircraft. The U.S. Navy has, notably, called upon Omega’s aircraft on a regular basis to support fighters transiting across the Atlantic for quite some time. The arrival of Metrea onto the commercial aerial refueling scene, operating a fleet of formerly French and Singaporean KC-135s, quickly saw the company secure supporting roles for the U.S. Air Force both at home and overseas. Omega’s fleet of ex-USAF KC-10s has now also been raised within the context of rumors about the possible reactivation of an SR-71 Blackbird by NASA. While fuel tank isolation was a feature that had to be modified onto the U.S. Air Force’s large KC-135 fleet (resulting in the KC-135Q, now KC-135T), this was fitted as standard on the KC-10. This allows any KC-10 to theoretically deliver the special JP-7 fuel required by the SR-71. As we reported earlier this month, some more of the retired KC-10s at the boneyard appear to have been earmarked as surplus for the purposes of foreign military sales program. This would see as many as four KC-10s transferred to an unspecified North African partner, which we believe to be either Egypt or Morocco. Just as many feared the impending death of the trijet, particularly following the mass retirement of MD-11s following the fatal crash of UPS Flight 2976 in Nov. 2025, more and more of these iconic aircraft are gaining new leases of life. Many thanks to Dan Rivera of Aircraft Expeditions for contributing his image of the KC-10’s departure. Why Lockheed’s giant nuclear-powered attack carrier was too extreme to build (Video) In 1969, Lockheed imagined the CL-1201, a nuclear-powered behemoth with a wingspan longer than three football fields. Designed as an airborne aircraft carrier, it could launch two dozen fighters, carry cruise missiles, and deploy hundreds of troops from the sky. One-way attack drones intercepted using US ally’s uncrewed air system integrated with rockets The team will now look to build on the latest success to extend the T-150’s use in this new way to the maritime environment. By Prabhat Ranjan Mishra Military Oct 21, 2026 02:31 PM EST Note: See photo in the original article. The trials were conducted alongside BAE Systems Maryland-based partner, SURVICE Engineering. BAE Systems A new uncrewed air system (UAS) successfully intercepted multiple one-way attack drones. The modified version of T-150 Uncrewed Air System (UAS) conducted the mission during a US Office of the Under Secretary for Research & Engineering (OUSW) experiment. Developed by BAE Systems subsidiary Malloy Aeronautics, the TRV-150 was equipped with a three-pod launcher firing BAE Systems’ laser-guided APKWS rockets to engage several targets in succession without landing or reloading. Low-cost precision weapons integrated onto uncrewed platforms The trials, conducted alongside BAE Systems Maryland-based partner, SURVICE Engineering, demonstrated how low-cost precision weapons can be integrated onto uncrewed platforms to counter the growing drone threats on the battlefield. “Our customers are facing drone threats right now, so we’ve worked at pace with our partners to move from concept to a proven system, which can engage multiple targets in a single mission,” said Thomas Lancashire, Head of UAS Business Development, BAE Systems’ FalconWorks. “Military technology is evolving faster than ever and it’s vital that effective capabilities reach those who protect us as quickly as possible. In today’s environment, the speed at which we deliver equipment can be just as important as the system itself,” added Lancashire. First-ever single-shot firing of a precision munition from T-150 The company revealed that these latest tests build on the first-ever single-shot firing of a precision munition from an adapted T-150 in July last year, extending that capability through the use of a production-ready three-pod launcher system to engage with air targets. “Supporting the warfighter has been at the core of SURVICE’s mission since its founding over 45 years ago. Bringing the TRV-150 to the US warfighter and now adding APKWS as a proven, precise, and cost-effective capability to our TRV-150 UAS platform is exactly the type of innovation SURVICE was designed to deliver,” said Gregory Thompson, President SURVICE. Besides its counter-drone role, the platform has also already been deployed with UK armed forces to deliver tactical logistics, most notably with the Royal Navy’s Carrier Strike Group where it carried supplies between ships throughout its eight-month Indo-Pacific deployment last year. The version of the Malloy T-150 involved in these air-to-air targeting trials, known as the TRV-150, was adapted to meet the US Army requirements by industry partner SURVICE Engineering whilst the APKWS modification kit was developed and integrated by BAE Systems FalconWorks division, according to a press release. SURVICE Engineering is one of several industry partners working with BAE Systems around the world to develop tactical counter-drone systems, combining agility, affordability and operational flexibility within a multi-role configurable concept. The team will now look to build on this success to extend the T-150’s use in this way to the maritime environment, with the aim of ultimately helping protect customers from similar threats at sea, as per the release. FAA New AD Orders Boeing 787 Slat Actuator Replacement The new FAA rule requires specified slat actuator replacements and updated maintenance procedures, with estimated replacement costs of $32,375 per aircraft. By Kevin Derby October 12, 20269 Mins Read ShareFollow Us Google News Note: See applicability chart in the original article. Photo: Clément Alloing WASHINGTON, D.C.- The U.S. Federal Aviation Administration (FAA) has issued a new airworthiness directive requiring additional safety measures on affected Boeing 787-8, 787-9, and 787-10 aircraft registered in the United States. The directive retains existing inspection requirements and mandates replacing specific leading-edge slat actuators. The new rule takes effect on November 12, 2026, and aims to prevent a potentially unsafe slat position from going undetected during flight. FAA Introduces New Boeing 787 Slat System Requirements The FAA is superseding Airworthiness Directive (AD) 2019-20-07 with a new directive that introduces further corrective actions for the Boeing 787 Dreamliner family. The earlier directive required repetitive operational checks of the leading-edge outboard slats, additional maintenance actions when necessary, and changes to aircraft operating procedures and maintenance programmes. The new directive continues those requirements while adding a mandatory replacement of the leading-edge outboard geared rotary actuator (GRA) with a leading-edge outboard lockout actuator (LEOLA) at specified slat locations. Operators must also revise their existing maintenance or inspection programmes to incorporate a new certification maintenance requirement. The FAA developed the additional requirements after Boeing identified further actions to address the potential safety risk. The agency determined that the revised measures were necessary to maintain the continued safe operation of affected aircraft. ↗ The directive also removes certain aircraft from its applicability, although the supplied rule summary does not identify those aircraft individually. Photo: Boeing What Is the Safety Concern Behind the Directive? The FAA issued the directive to address a potential condition in which the Boeing 787’s leading-edge outboard slat system could remain out of position without a corresponding flight deck annunciation. Leading-edge slats are movable aerodynamic surfaces installed along the front of an aircraft’s wings. They help generate lift, particularly during low-speed operations such as take-off and landing. If the slat system does not reach or maintain its intended position, the aircraft could experience reduced lift. The absence of a flight deck warning could prevent the flight crew from receiving the expected indication of the system’s condition. According to the FAA, the unsafe condition could result in insufficient lift and an inability to maintain continued safe flight and landing if it remains unaddressed. The new actuator requirement forms part of the regulator’s effort to address this risk through hardware changes and updated maintenance procedures. Photo: Boeing Which Boeing 787 Aircraft Are Affected? The earlier directive applied to Boeing 787-8, 787-9 and 787-10 aircraft. The new directive retains the existing requirements for aircraft that remain within its applicability while introducing additional corrective actions. The FAA estimates that the new rule affects 174 aircraft registered in the United States. Aircraft or systemRequired actionBoeing 787-8Comply if the aircraft remains within the directive’s applicabilityBoeing 787-9Comply if the aircraft remains within the directive’s applicabilityBoeing 787-10Comply if the aircraft remains within the directive’s applicabilityLeading-edge outboard slatsContinue the required repetitive operational checksSlat actuatorsReplace specified geared rotary actuators with lockout actuatorsMaintenance programmeIncorporate the new certification maintenance requirementAircraft flight manualRetain the applicable restriction on flap retraction under icing conditions after landing. The FAA’s rule removes certain aircraft from the applicability. Operators must therefore determine whether each aircraft in their fleets falls within the final directive’s scope before planning compliance. Boeing Supplier Dispute Halts 777 Freighter Output For Two Months BW Online Bureau Oct 24, 2026 A dispute with Florida-based Vaero over a critical wing component has disrupted Boeing’s 777 freighter and 767 programmes, with the planemaker seeking to bring production of the part in-house Gallery Boeing’s 777 freighter production has remained halted for nearly two months following a dispute with supplier Vaero over a critical wing component, according to media reports. The dispute has also disrupted production of the 767, including freighters and KC-46 aerial refuelling tankers. The disruption continued even after the two companies reached a settlement in late September, highlighting Boeing’s dependence on a single supplier for a component used in two aircraft programmes. Boeing’s court complaint said the interruption was costing the planemaker as much as USD 6.5 million a day. Supplier Dispute Disrupts Aircraft Production Boeing filed a complaint in August alleging that Vaero, a Florida-based supplier, had stopped delivering a component known as the trailing-edge rib kit. The shortage stalled work at Boeing’s wing-production facility in Everett, Washington, which supports the 777 freighter and 767 programmes. In its complaint, Boeing described the component as indispensable and identified Vaero as its sole supplier. Although the companies settled the dispute in late September, production of the 777 freighter had not resumed as of 23 October, according to three Boeing workers familiar with the matter. The dispute also disrupted production of the 767, a widebody aircraft used for cargo and military operations. Boeing Seeks To Bring Component Production In-House Boeing is working to bring production of the trailing-edge rib kit in-house, according to media reports. The component is used in wing assembly for the current-generation 777 freighter and the 767. The supply shortage forced Boeing to remove two partially assembled 777 freighters from its final assembly line, according to one Boeing worker. Aviation consultancy IBA’s data helped Reuters identify one of the aircraft as destined for FedEx. The disruption has not affected Boeing’s next-generation 777X programme, which uses composite wings rather than the components involved in the dispute. Deliveries Face Production Constraints Boeing has delivered 21 777 freighters so far in 2026. A small number of additional aircraft whose wings were assembled before the supply disruption could still be delivered before the end of the year. The production halt comes as the company works to maintain output across its commercial and military aircraft programmes. The continued interruption to the 777 freighter line, despite the settlement, leaves the timing of a production restart uncertain. Pratt & Whitney expands Polish plant to boost production of F-35 engine components By Martin Chomsky (Defence Industry Europe) Corporate | October 23, 2026 Photo: RTX (Pratt & Whitney). Pratt & Whitney has begun building a $100 million facility in Rzeszów, Poland, to increase production capacity and introduce manufacturing of critical rotating engine components. The expansion will support growing demand for commercial and military engines, including the GTF, F135 and F100. The facility is expected to become operational in 2028 and create more than 120 jobs. The investment is equivalent to 375 million zloty. The project complements a $200 million investment announced in February for a seventh isothermal forging press at Pratt & Whitney’s Columbus Forge facility in Georgia. Together, the two investments are expected to increase output of critical engine parts, including rotating compressors and turbine disks, by 30%. Both projects are expected to be fully operational by 2028. They add capacity at separate stages of the company’s engine manufacturing operations. “Six months ago, we were talking about this investment as a plan and an opportunity to strengthen Poland’s position as a strategic center of excellence for Pratt & Whitney,” said Piotr Owsicki, general manager of Pratt & Whitney in Rzeszów. “Today, we begin turning that plan into reality.” Rzeszów already produces GTF fan drive gear systems, F100 static structures and key F135 parts. The site also provides manufacturing and technology development capabilities for turboprops and auxiliary power units. Its engine production includes the PT6, PW200, PW500/600 and PW800 families, serving helicopters, business jets and general aviation aircraft. The new facility will add rotating-component manufacturing to that existing workload. Poland is RTX’s largest investment and employee base outside the United States. The group employs more than 9,500 people in the country across Pratt & Whitney, Collins Aerospace and Raytheon. Improper Elevator Cable Installation Causes Carbon Cub Crash The pilot recalled doing a flight control check before the flight, during which he found the controls operated normally. During the initial climb from the airport in Ogallala, Nebraska, when the CubCrafters Carbon Cub was about 30 to 50 feet above ground level, the elevator control went slack. When he could not regain elevator control, he adjusted engine power in an attempt to regain control of the airplane’s pitch, however the plane descended and hit the runway surface. It skidded off the runway and a post-impact fire ensued. The pilot, who sustained minor injuries in the crash, was able to get out of the airplane before it was destroyed by the fire. A post-accident examination of the airplane found that the top elevator control cable was not attached to the elevator horn. The securing bolt and nut were not located. The lower elevator control cable remained attached via its bolt, but the securing nut was not located. After the airplane was originally assembled in 2021, it was inspected by an FAA Designated Airworthiness Representative, who would have checked the build. It had subsequently undergone several annual condition inspections, including one by an Airframe & Powerplant mechanic who was different than the owner/builder. The most recent condition inspection was performed by the owner/builder about nine months before the accident, which would have included inspection of all flight control surfaces. Review of the airplane’s maintenance logs did not reveal any maintenance related to the elevator, nor did the owner/builder recall any recent maintenance on the elevator. Probable Cause: The improper installation of the elevator control cable hardware, which resulted in the separation of the elevator control cable and a loss of pitch control in flight. To download the final report. Click here. This will trigger a PDF download to your device. This October 2024 accident report is provided by the National Transportation Safety Board. Published as an educational tool, it is intended to help pilots learn from the misfortunes of others. Curt Lewis